ProjectQty
Menu
CalculatorsGuidesProjectsMethodologySourcesStart calculating

/// Wall-area masonry takeoff

Brick Calculator

Use the brick calculator to subtract openings from wall area, combine actual brick face dimensions with the planned mortar joint, and round a waste-adjusted piece count up. Measure each wall and opening consistently, then keep corners, bonds, cuts, special units, and breakage assumptions visible rather than treating one nominal bricks-per-area value as universal.

Content reviewed Jul 16, 2026 · Source records reviewed through Jul 15, 2026

01

Wall and brick dimensions

Measure the wall face, subtract major openings, and enter the actual brick dimensions plus the intended mortar joint.

ftExample starting measurement — replace it with your field measurement.
ftExample starting measurement — replace it with your field measurement.
ft²Example starting measurement — replace it with your field measurement.
inRequired — enter the value from the exact product label or current technical sheet. ProjectQty does not guess this value.Unit Length must be greater than zero.
inRequired — enter the value from the exact product label or current technical sheet. ProjectQty does not guess this value.Unit Height must be greater than zero.
inRequired — enter the value from the exact product label or current technical sheet. ProjectQty does not guess this value.Joint must be greater than zero.
%Required — enter a project-specific planning value and verify it before ordering. ProjectQty does not apply an unsupported default.
USDOptional — enter your current local price per brick.
View current estimate

/// Answer-first planning notes

How many bricks fit my wall dimensions and mortar joint?

How many bricks fit my wall dimensions and mortar joint checkpoints
Planning inputCalculation roleField check
Net wall areaRemoves entered openingsMeasure every wall face separately
Brick plus joint moduleSets coverage per laid unitUse actual selected brick dimensions
Waste allowanceIncreases pieces before roundingAdjust for bond, cuts, and handling

/// Formula & field notes

How this brick estimate works

FormulaBrick count = net wall area ÷ ((brick length + joint) × (brick height + joint)), with waste applied before rounding up.

Worked example

A 10 ft × 8 ft wall using 7⅝ in × 2¼ in modular bricks with ⅜ in joints needs about 604 bricks after a 10% allowance.

/// Source trail

Data & assumptions

Every source has a declared scope. A reference can support a conversion or product assumption without turning this estimate into a supplier quote.

National Institute of Standards and Technology · Primary evidenceNIST Guide to the SI, Appendix B: Conversion Factors

Exact international-foot to meter conversion; U.S. survey-foot conversion is explicitly outside this claim.

Effective 2025-08-18 · Reviewed 2026-07-15 · Next review 2027-07-15
NOAA National Geodetic Survey · Prequalified fallbackThe DSDATA Format, Appendix D: U.S. Survey Foot vs International Foot

Independent confirmation that one international foot equals exactly 0.3048 meters; U.S. survey-foot conversion remains distinct.

Effective 2025-06-10 · Reviewed 2026-07-15 · Next review 2027-07-15

/// Common questions

Brick calculator FAQ

What should I verify before ordering brick?

Confirm field dimensions and brick dimensions and mortar-joint width against the exact product or supplier information. ProjectQty shows the assumptions so you can replace planning defaults before ordering whole bricks.

How does waste affect the brick estimate?

Waste is applied after the base geometry is calculated and before discrete packages or pieces are rounded up. Use a higher allowance for complex layouts, cuts, pattern matching, breakage, or uncertain field dimensions.

Is this brick result a professional design?

No. It is a quantity-planning result. Wall ties, flashing, lintels, movement joints, and structural requirements must be designed separately.

/// Keep planning

Related calculators

01Concrete BlockEstimate concrete masonry units for a net wall area using specified block dimensions, mortar joints, openings, and waste.02MortarTurn a brick or block count into whole mortar bags using an editable units-per-bag yield and a visible waste allowance.03CementEstimate finished mix volume, dry ingredient volume, and cement bags from project dimensions, an editable dry-volume factor, mix ratio, bag volume, and waste.