ProjectQty
Menu
CalculatorsGuidesProjectsMethodologySourcesStart calculating

/// Site-mix material planning

Cement Calculator

Use the cement calculator to expand finished geometric volume by an entered dry-volume factor, divide that dry volume by the entered mix ratio, and round the cement portion into whole selected bags. The factor, ratio, bag volume, mix design, water, aggregates, strength, and suitability must come from the actual specification rather than a hidden recipe.

Content reviewed Jul 16, 2026 · Source records reviewed through Jul 15, 2026

01

Volume and mix ratio

Use only a mix ratio specified for your project. Replace the planning dry-volume factor with approved batch-yield information whenever available.

ftExample starting measurement — replace it with your field measurement.
ftExample starting measurement — replace it with your field measurement.
inExample starting measurement — replace it with your field measurement.
×Multiplier applied to finished volume. Replace it with approved batch-yield information when available. Required — enter a project-specific planning value and verify it before ordering. ProjectQty does not apply an unsupported default.Dry Volume Factor must be greater than zero.
partsRequired — enter a project-specific planning value and verify it before ordering. ProjectQty does not apply an unsupported default.Cement Parts must be greater than zero.
partsRequired — enter a project-specific planning value and verify it before ordering. ProjectQty does not apply an unsupported default.Sand Parts must be greater than zero.
partsRequired — enter a project-specific planning value and verify it before ordering. ProjectQty does not apply an unsupported default.Aggregate Parts must be greater than zero.
ft³Required — enter the value from the exact product label or current technical sheet. ProjectQty does not guess this value.Bag Yield must be greater than zero.
%Required — enter a project-specific planning value and verify it before ordering. ProjectQty does not apply an unsupported default.
USDOptional — enter your current local price per bag.
View current estimate

/// Answer-first planning notes

How much cement follows from my finished volume and mix inputs?

How much cement follows from my finished volume and mix inputs checkpoints
Planning inputCalculation roleField check
Finished volumeSets the placed geometric quantityMeasure the intended form or placement
Dry factor and ratioAllocate the cement shareUse an approved mix basis
Bag volumeRounds cement to whole packagesMatch the selected product

/// Formula & field notes

How this cement estimate works

FormulaDry ingredient volume = finished volume × dry-volume factor. Cement volume = dry volume × cement parts ÷ total mix parts. Bags round up.

Worked example

A 10 ft × 10 ft × 4 in volume with 10% waste, a 1.54 dry-volume factor, and a 1:2:3 ratio allocates about 9.41 ft³ to cement, or 10 one-ft³ bags.

/// Source trail

Data & assumptions

Every source has a declared scope. A reference can support a conversion or product assumption without turning this estimate into a supplier quote.

National Institute of Standards and Technology · Primary evidenceNIST Guide to the SI, Appendix B: Conversion Factors

Exact international-foot to meter conversion; U.S. survey-foot conversion is explicitly outside this claim.

Effective 2025-08-18 · Reviewed 2026-07-15 · Next review 2027-07-15
NOAA National Geodetic Survey · Prequalified fallbackThe DSDATA Format, Appendix D: U.S. Survey Foot vs International Foot

Independent confirmation that one international foot equals exactly 0.3048 meters; U.S. survey-foot conversion remains distinct.

Effective 2025-06-10 · Reviewed 2026-07-15 · Next review 2027-07-15

/// Common questions

Cement calculator FAQ

What should I verify before ordering cement?

Confirm field dimensions and approved mix ratio and cement-bag volume against the exact product or supplier information. ProjectQty shows the assumptions so you can replace planning defaults before ordering whole bags.

How does waste affect the cement estimate?

Waste is applied after the base geometry is calculated and before discrete packages or pieces are rounded up. Use a higher allowance for complex layouts, cuts, pattern matching, breakage, or uncertain field dimensions.

Is this cement result a professional design?

No. It is a quantity-planning result. This tool cannot select a structural mix, water-cement ratio, strength class, exposure class, or curing method.

/// Keep planning

Related calculators

01ConcreteEstimate concrete volume and cubic yards, with optional package counts scoped to QUIKRETE Concrete Mix No. 1101 yields.02MortarTurn a brick or block count into whole mortar bags using an editable units-per-bag yield and a visible waste allowance.03SandCalculate sand volume for bedding, fill, leveling, play areas, or landscape work without inventing a universal material weight.