ProjectQty
Menu
CalculatorsGuidesProjectsMethodologySourcesStart calculating

/// Lawn area and roll count

Sod Calculator

Use the sod calculator to multiply lawn length by width, apply the cutting allowance you choose, divide by supplier coverage per roll or slab, and round up to whole units. Measure irregular lawn sections separately. Sod dimensions, pallet quantities, seams, grade, irrigation, soil preparation, delivery limits, installation timing, and retained repair pieces need separate checks.

Content reviewed Jul 16, 2026 · Source records reviewed through Jul 15, 2026

01

Lawn area and sod coverage

Enter the exact coverage for one supplier roll, slab, or pallet unit. Product dimensions vary by region and grower.

ftExample starting measurement — replace it with your field measurement.
ftExample starting measurement — replace it with your field measurement.
ft²Required — enter the value from the exact product label or current technical sheet. ProjectQty does not guess this value.Roll Coverage must be greater than zero.
%Required — enter a project-specific planning value and verify it before ordering. ProjectQty does not apply an unsupported default.
USDOptional — enter your current local price per roll.
View current estimate

/// Answer-first planning notes

How many sod rolls or slabs cover my measured lawn?

How many sod rolls or slabs cover my measured lawn checkpoints
Planning inputCalculation roleLandscape check
Lawn dimensionsCreate measured installation areaSeparate irregular sections
Supplier unit coverageConverts area into sod piecesUse the actual roll or slab
Cutting allowanceAdds pieces before whole-unit roundingReflect edges and layout

/// Formula & field notes

How this sod estimate works

FormulaSod units = lawn area × (1 + waste %) ÷ supplier coverage per roll or slab, rounded up.

Worked example

A 50 ft × 20 ft lawn is 1,000 ft²; with 5% waste and 10 ft² rolls, the order quantity is 105 rolls.

/// Source trail

Data & assumptions

Every source has a declared scope. A reference can support a conversion or product assumption without turning this estimate into a supplier quote.

National Institute of Standards and Technology · Primary evidenceNIST Guide to the SI, Appendix B: Conversion Factors

Exact international-foot to meter conversion; U.S. survey-foot conversion is explicitly outside this claim.

Effective 2025-08-18 · Reviewed 2026-07-15 · Next review 2027-07-15
NOAA National Geodetic Survey · Prequalified fallbackThe DSDATA Format, Appendix D: U.S. Survey Foot vs International Foot

Independent confirmation that one international foot equals exactly 0.3048 meters; U.S. survey-foot conversion remains distinct.

Effective 2025-06-10 · Reviewed 2026-07-15 · Next review 2027-07-15

/// Common questions

Sod calculator FAQ

What should I verify before ordering sod?

Confirm field dimensions and supplier roll or slab coverage and lawn shape against the exact product or supplier information. ProjectQty shows the assumptions so you can replace planning defaults before ordering whole rolls or slabs.

How does waste affect the sod estimate?

Waste is applied after the base geometry is calculated and before discrete packages or pieces are rounded up. Use a higher allowance for complex layouts, cuts, pattern matching, breakage, or uncertain field dimensions.

Is this sod result a professional design?

No. It is a quantity-planning result. Species, climate, soil preparation, irrigation, delivery timing, and installation practices require local supplier guidance.

/// Keep planning

Related calculators

01Grass SeedEstimate seed weight and whole bags from lawn area, the exact label application rate, bag weight, and a field allowance.02TopsoilCalculate topsoil cubic yards for lawns, raised beds, grading, and planting areas, with optional tonnage and local price inputs.03CompostCalculate compost volume for beds or topdressing from area, applied depth, and waste while keeping product weight unspecified.