/// Short answer
concrete stairs volume — the planning answer
Estimate concrete stairs by separating the stair flight, individual treads and risers, landings, footings, and any side walls into measurable shapes. Calculate each component from its specified dimensions, add the volumes, and convert to yards or exact bag yield. Stair geometry and reinforcement are design inputs; the calculator organizes entered quantities but does not determine a safe stair layout or structural detail.
How do you estimate concrete stairs volume?
Estimate concrete stairs by separating the stair flight, individual treads and risers, landings, footings, and any side walls into measurable shapes. Calculate each component from its specified dimensions, add the volumes, and convert to yards or exact bag yield. Stair geometry and reinforcement are design inputs; the calculator organizes entered quantities but does not determine a safe stair layout or structural detail.
Total concrete = sum of tread, riser, landing, stringer, and footing volumes. Use one unit system before adding components and apply an explicit allowance only after the base quantity is traceable.
/// Continue with the numbers
Run the concrete calculator
Use this concrete calculator to enter each rectangular or circular pour separately, calculate net cubic feet and cubic yards, then apply a visible project-specific waste allowance. Optional 40, 50, 60, or 80 lb bag counts use only the selected QUIKRETE Concrete Mix No. 1101 yield and round up at the final package step.
/// Keep the topic connected
Related calculators
Use the neighboring tools to keep each material, layer, and order assumption visible instead of hiding it inside one estimate.
What should you measure first?
Use the stair drawing or field dimensions to separate horizontal run, rise, width, slab thickness, and landing geometry. Avoid multiplying total stair width by total envelope height unless the shape is actually rectangular.
- Count steps and record tread, riser, and stair width.
- Measure landings, side walls, and footings as separate shapes.
- Confirm whether the stair flight is a solid block, slab, or open-riser assembly.
What should you verify before ordering?
Verify rise and run, structural support, reinforcement, drainage, formwork, access, and local code requirements separately from the material quantity.
- Cross-check the volume with the stair section drawing.
- Keep landing and footing quantities separate.
- Confirm the supplier's minimum delivery and placement sequence.
/// Continue the workflow
Related ProjectQty pages
/// Field-ready worksheet
Download the measurement checklist
Use the worksheet to record dimensions, product-label values, and verification notes locally. ProjectQty does not receive or store your project inputs.
/// Evidence trail
Sources and assumptions
This article inherits the calculator's declared source scope. Product yields, coverage, density, and label rates should be replaced with the exact product selected for the job.
Exact international-foot to meter conversion; U.S. survey-foot conversion is explicitly outside this claim.
NOAA National Geodetic Survey · Prequalified fallbackThe DSDATA Format, Appendix D: U.S. Survey Foot vs International FootIndependent confirmation that one international foot equals exactly 0.3048 meters; U.S. survey-foot conversion remains distinct.
The QUIKRETE Companies, LLC · Primary evidenceQUIKRETE Concrete Mix No. 1101-40 product yieldApproximate 0.3 ft³ yield for the 40 lb QUIKRETE Concrete Mix No. 1101-40 package only; not a generic bag-yield assumption.
The QUIKRETE Companies, LLC · Primary evidenceQUIKRETE Concrete Mix No. 1101-50 product yieldApproximate 0.375 ft³ yield for the 50 lb QUIKRETE Concrete Mix No. 1101-50 package only; not a generic bag-yield assumption.
The QUIKRETE Companies, LLC · Primary evidenceQUIKRETE Concrete Mix No. 1101-60 product yieldApproximate 0.45 ft³ yield for the 60 lb QUIKRETE Concrete Mix No. 1101-60 package only; not a generic bag-yield assumption.
The QUIKRETE Companies, LLC · Primary evidenceQUIKRETE Concrete Mix No. 1101-80 product yieldApproximate 0.6 ft³ yield for the 80 lb QUIKRETE Concrete Mix No. 1101-80 package only; not a generic bag-yield assumption.
/// Common questions
Concrete Stair Tread Volume: Estimate Steps and Landings FAQ
Can I calculate concrete stairs as one rectangular box?
Only when the geometry is truly rectangular. Most stairs contain sloped or stepped voids, so separate treads, risers, landings, and support elements for a traceable estimate.
Does this calculator determine stair rise and run?
No. Rise, run, width, support, and code compliance are project-specific design decisions. Use approved dimensions as calculator inputs.
Should stair footings be included?
Include them as separate measured components when they belong to the order. Do not assume their size from the stair width or concrete volume.