/// Short answer
concrete for a pool deck — the planning answer
Estimate pool-deck concrete by measuring each deck band, landing, step, and separate pour area around the pool, then multiplying area by the specified depth. Deduct the pool opening and add coping or thickened sections as separate shapes. Convert the total to cubic yards or exact bag yield with a visible allowance. Drainage, joints, reinforcement, finish, and pool-edge details remain project-specific.
How do you estimate concrete for a pool deck?
Estimate pool-deck concrete by measuring each deck band, landing, step, and separate pour area around the pool, then multiplying area by the specified depth. Deduct the pool opening and add coping or thickened sections as separate shapes. Convert the total to cubic yards or exact bag yield with a visible allowance. Drainage, joints, reinforcement, finish, and pool-edge details remain project-specific.
Pool-deck volume = sum of measured deck areas × their specified depths. Subtract openings only when they are included in the gross shape and not already excluded.
/// Continue with the numbers
Run the concrete calculator
Use this concrete calculator to enter each rectangular or circular pour separately, calculate net cubic feet and cubic yards, then apply a visible project-specific waste allowance. Optional 40, 50, 60, or 80 lb bag counts use only the selected QUIKRETE Concrete Mix No. 1101 yield and round up at the final package step.
/// Keep the topic connected
Related calculators
Use the neighboring tools to keep each material, layer, and order assumption visible instead of hiding it inside one estimate.
What should you measure first?
Trace the deck outside the pool and split rectangular, curved, and stepped areas. Record the pool shape, coping width, drains, openings, and any different thickness.
- Measure each deck band and landing around the pool.
- Deduct the pool opening and non-poured features once.
- Record coping, steps, thickened edges, and separate finishes as distinct lines.
What should you verify before ordering?
A quantity calculator does not design pool drainage, structural support, reinforcement, slip-resistant finish, joints, or code-compliant clearances. Verify the full pool-deck detail before ordering.
- Check the measured perimeter against the pool plan.
- Confirm finished depth and supplier yield.
- Ask about truck access, washout, and placement sequencing.
/// Continue the workflow
Related ProjectQty pages
/// Field-ready worksheet
Download the measurement checklist
Use the worksheet to record dimensions, product-label values, and verification notes locally. ProjectQty does not receive or store your project inputs.
/// Evidence trail
Sources and assumptions
This article inherits the calculator's declared source scope. Product yields, coverage, density, and label rates should be replaced with the exact product selected for the job.
Exact international-foot to meter conversion; U.S. survey-foot conversion is explicitly outside this claim.
NOAA National Geodetic Survey · Prequalified fallbackThe DSDATA Format, Appendix D: U.S. Survey Foot vs International FootIndependent confirmation that one international foot equals exactly 0.3048 meters; U.S. survey-foot conversion remains distinct.
The QUIKRETE Companies, LLC · Primary evidenceQUIKRETE Concrete Mix No. 1101-40 product yieldApproximate 0.3 ft³ yield for the 40 lb QUIKRETE Concrete Mix No. 1101-40 package only; not a generic bag-yield assumption.
The QUIKRETE Companies, LLC · Primary evidenceQUIKRETE Concrete Mix No. 1101-50 product yieldApproximate 0.375 ft³ yield for the 50 lb QUIKRETE Concrete Mix No. 1101-50 package only; not a generic bag-yield assumption.
The QUIKRETE Companies, LLC · Primary evidenceQUIKRETE Concrete Mix No. 1101-60 product yieldApproximate 0.45 ft³ yield for the 60 lb QUIKRETE Concrete Mix No. 1101-60 package only; not a generic bag-yield assumption.
The QUIKRETE Companies, LLC · Primary evidenceQUIKRETE Concrete Mix No. 1101-80 product yieldApproximate 0.6 ft³ yield for the 80 lb QUIKRETE Concrete Mix No. 1101-80 package only; not a generic bag-yield assumption.
/// Common questions
Concrete Pool Deck Quantity: Measure Separate Pour Areas FAQ
Do I subtract the pool from the deck area?
Subtract the pool opening when your starting shape includes it. If you measured only the deck surface, do not subtract it a second time.
Should coping be part of the pool-deck concrete quantity?
Only if it is the same material and pour scope. Measure coping or thickened edge geometry separately so the order remains explainable.
Can the calculator determine pool-deck thickness?
No. Use the approved project thickness and separate any thicker edge, beam, or support detail from the main deck slab.